Machine Setting- Carriage Free Page - GCC Technologies LaserPro Spirit Series User Manual

Machine Setting- Carriage Free Page

The Carriage Free Page allows you to decide whether the lens carriage to be locked or free for
hand movement. If the Carriage Free setting is set to <YES>, then you will be able to manually
move the lens carriage along the X and Y axis by hand with the top door open. Whereas setting
the Carriage Free to <NO> will lock the lens carriage and movement or positioning can only be
done by the control panel arrow keys.
• Carriage Free YES / NO
Relevant Buttons
F1 (Back)
F4 (Save)
/ Directional
Start / Stop
Auto Focus
/ Manual Focus Buttons
Carriage Free Page
Back to previous page
Save your current settings
Cycle Red Beam between Back / Save
Back to Main Work Page
Initiate the auto focus function
Manually adjust the height of the work table (Z-axis)
91
Navigating to this page:
Main Work Page
press F4
Functions Page
Select<Machine
Setting>from the menu
Machine Setting Page
Select<Ca rri a g e
Free >from the menu
Carriage Free Page
Function
232001290G(13)