Machine Setting- Set Standby Mode Page - GCC Technologies LaserPro Spirit Series User Manual

Machine Setting- Set Standby Mode Page

The Set Standby Mode page allows you to configure the laser machine automatically enter into
power saving if machine is idle for a specified time.
When entering into the Set Standby Mode function, you can use Left or Right arrow keys to scroll
between <Enable> or <Disable> the function. The Time function is to determine after how long
the laser machine is idle, it will enter in power saving automatically. The default time is 4 minutes.
The Enter Standby function will turn the machine into power saving immediately after selected.
• Standby: Enable/ Disable
• Time: 4-30 mins. (Default 4 mins.)
• Enter Standby: YES/ NO
Relevant Buttons
F1 (Back)
F4 (Save)
/ Directional
Start / Stop
Auto Focus
/ Directional
/ Manual Focus Buttons
Set Standby Mode Page
Back to previous page
Save your current settings
Cycle standby mode between YES / NO
Back to Main Work Page
Initiate the auto focus function
Scroll between menu options
Manually adjust the height of the work table (Z-axis)
94
Navigating to this page:
Main Work Page
press F4
Functions Page
Select<Ma chin e
Se tting >from the menu
Machine Setting Page
Select<Set Standby
M od e > from the menu
Set Standby Mode Page
Function
232001290G(13)