Mirror (Options Page); Invert (Options Page); Print Immediately (Options Page); Smartact (Options Page) - GCC Technologies LaserPro Spirit Series User Manual

Mirror (Options Page) [DEFAULT SETTING: Unselected]
Checking this box will automatically engrave your image with a mirrored effect. This setting will
flip the image along the Y-axis from left to right and vice-versa.
T ip
When engraving a stamp, via the stamp mode, the stamp image needs to be
engraved in reverse (mirrored) for the final stamp to be correctly laid out.
Invert (Options Page) [DEFAULT SETTING: Unselected]
Checking this box automatically inverts / reverses the color of your image (the white areas
become black and vice versa). The Invert option is not available if disabled while Manual Color
File mode is selected.
T ip
Invert mode is useful when creating a stamp in Stamp Mode, as inverting your
normal image will set the negative space to be engraved out, with the remaining
positive space (your stamp design) protruding out.
Print Immediately (Options Page) [DEFAULT SETTING: Unselected]
Checking this will instruct the LaserPro Spirit Series to immediately begin the laser engraving
process, when you select Print from your graphic software program. If Print Immediately is not
checked, then selecting Print will transfer the job file to the LaserPro Spirit Series system and will
need to be initialized from the LaserPro Spirit Series control panel.
SmartACT (Options Page) [DEFAULT SETTING: Unselected]
SmartACT reduces the amount of time it takes to process a job, by eliminating unnecessary
travel of the lens carriage at the expense of some quality. Usually the quality loss is minimal, but
will depend on the image or design you are working with; please take some time to experiment
with your particular design to determine whether the tradeoff is acceptable. When selected, the
working area will be extended as well.
115 232001290G(13)