Work Piece Limitations; R Ot A Ry Att A Chm E Nt & Rotary Chuck - GCC Technologies LaserPro Spirit Series User Manual

Damage may occur to the system if you try to raise the work table without proper setting
of the metal guard.
7) Now position the included material support stands so they support the thick, firm material you
will be working with, while avoiding the laser path. In other words, avoid placing the support
stands underneath any section of the material that will be lasered, especially during laser
cutting.
7.5 R ot a ry Att a chm e nt & Rotary Chuck
The rotary attachment and rotary chuck options provide the Spirit Series with the ability to engrave
on cylindrical or spherical objects. In addition to the standard X, Y, Z axis, the rotary attachment
and rotary chuck allow for a fourth axis which rotates your object 360° to allow for engraving on
cups, wine glasses, and even balls. Users can choose rotary attachment or rotary chuck according
to their applications.
Rotary Attachment Specification
Medium Rotary Attachment for Spirit, Spirit LS models:
Maximum Length
Maximum Loading Weight
Minimum Inner Diameter (Large conical fixture)
Maximum Inner Diameter (Large conical fixture) 76 mm (2.99 inches)
Minimum Inner Diameter (Small conical fixture)
Maximum Inner Diameter (Small conical fixture) 46 mm (1.8 inches)
Maximum Outer Diameter
C A UTION

Work Piece Limitations

450 mm (17.71 inches)
4 kg (8.8 lbs.)
50 mm (1.96 inches)
12 mm (0.47 inches)
176 mm (6.9 inches)
165 232001290G(13)