GCC Technologies LaserPro Spirit Series User Manual page 192

If the center of the mirror is scratched, contact your GCC LaserPro representatives for
replacement.
DO NOT apply any finger pressure or any other cleaning solutions to the mirror or focal
lens surface.
The optics components are very fragile, handle carefully and follow the cleaning
procedure well.
8.3.3 Removing and Cleaning the Focal Lens
1) Unscrew the three thumbscrews securing the lens carriage panel and remove the lens
carriage panel to reveal the focal lens.
2) Carefully pull out the focal lens.
3) Clean the focal lens with a cotton swab and lens cleaner solution. Be sure to clean both sides
of the focal lens (DO NOT apply any finger pressure or other cleaning solutions to the
lens surface).
4) After cleaning, use a cotton swab to gently dry the focal lens and lens cover.
Remove thumbscrew
C A UTION
188
Pull out the focal lens
232001290G(13)