Using The Laserpro Print Driver - GCC Technologies LaserPro Spirit Series User Manual

5.2.3 Using the LaserPro Print Driver

Now after you have properly set the Page and Layout and Color Management of your graphics
software, you are ready to configure the details of your actual job through the LaserPro print
driver. The LaserPro print driver allows you to adjust your engraving / cutting options. After you
have setup your image, design, or text to be engraved in your software application, you can
access the LaserPro Spirit Series print driver by going to <FILE> → <PRINT>→
<PROPERTIES>.
111 232001290G(13)