Combine The 3D Images; Output The 3D Graphic; Tips For Engraving 3D Graphics - GCC Technologies LaserPro Spirit Series User Manual

Step 4. Combine the 3D images
After finishing the production for each of the objects, you may proceed with the combination of the objects. The
combined graphic may be output with the laser engraver.

Output the 3D graphic

After selecting the graphic to be output, set the Mode as 3D Mode in the driver. After setting the engraving
parameters, output the 3D graphic.

Tips for engraving 3D graphics

149 232001290G(13)