5.2.3.6 Spirit Series Print Driver >> Raster Page
NOTE
The Raster Page is only available when Black & White Mode Setting is selected from
the Options Page, this page offers a number of advanced Raster Engraving output
options.
Contrast (Raster Page) [DEFAULT SETTING: 0]
This provides a quick and easy way to immediately adjust the contrast of an engraved image.
Moving the slider to the Dark setting will increase the contrast levels of the engraved output,
whereas moving the slider to the Light setting will decrease the contrast levels of the engraved
output.
T ip
There are other ways to adjust an engraved image's contrast such as: adjust
the power / speed settings or simply adjust the contrast of the image in software
with the graphic software application.
133
232001290G(13)