File Function (Options Page) - GCC Technologies LaserPro Spirit Series User Manual

After entering the filename and pressing <ok>, the Preview screen will be shown.
The output file can be previewed and an estimated working time of the job is also displayed.

File Function (Options Page):

The file function section allows you to manage various laser parameters. This section is useful
when performing duplicate jobs on a variety of objects, allowing you to save your frequently used
laser parameters and load them in the future.
• History File: This section contains a list of the recent files you have recently created and worked
with.
• SAVE: This function will save the current print driver parameter settings to a file and location on
your computer of your selection. (Saved parameter setting files will be tagged with the .Spi
extension)
• LOAD: This function allows you to load those previously saved print driver parameters.
• ORIGINAL: This function will load the print driver's original factory parameter settings.
• SAVE TO DEFAULT: This function allows you to save your current print driver parameters as the
default startup settings.
• DELETE: This function will delete the file you select from the History File section. Please note the
Delete function only removes the file from the history file section, it does not remove the .Spi file
from your hard drive, if you wish to completely remove the file from your hard disk, then you will
have to manually delete the file from your operating system.)
NOTE
If you are using Windows 2000 or above as your operating system, make sure you log
in with an administrator or administrator-rights account in order to properly save laser
parameter settings.
117 232001290G(13)