Table of Contents
Advertisement
CoDeSys PLC
ThinkIO
™
- P
PROGRAMMING ASSISTANCE GUIDE
6.2.2
Configuring a Fieldbus
Fieldbus devices must be configured before application programs can access them. The
CoDeSys IDE programming software is capable of configuring these devices. The following
procedure demonstrates how to configure a PROFIBUS DP master device.
PROCEDURE START: Configuring a fieldbus - PROFIBUS DP Master
1. Right click PLC Configuration, select Append Subelement,
then click THINKIO-C-FB-PRO-MS...
Page 22
ID 29867.06, Rev. 01
© 2007 Kontron Modular Computers GmbH
Advertisement
Table of Contents
