Approvals And Declarations Of Conformity; Legal Equipment Standards And Norms - Siemens SITRANS FC720 Operating Instructions Manual

Legal equipment standards and norms

21 Approvals and declarations of conformity

The SITRANS FC meets the statutory requirements of the applicable EU Directives. By
CE marking
attaching the CE mark, Siemens confirms conformity of the field instrument with the
requirements of the applicable EU Directives. The EU Declaration of Conformity is
enclosed with the product on a data carrier.
The SITRANS FC is in compliance with the statutory requirements of the applicable EU
Pressure equipment
Pressure Equipment Directive (PED) for fluid groups 1 and 2.
approvals
The customer is fully responsible of selecting proper materials which withstand corrosive
or erosive conditions. In case of heavy corrosion and/or erosion the instrument may not
withstand the pressure and an incident may happen with human and/or environmental
harm. Siemens will not take any liability regarding damage caused by corrosion or
erosion. If corrosion or erosion may happen, the user has to check periodically if the
necessary wall thickness is still in place.
SITRANS FC flow meter is intended to be sold and used in large-scale stationary
RoHS and WEEE
industrial applications, large-scale fixed installation, means of transport vehicles for
Intended Use
persons or goods, excluding two-wheel vehicles which are not type approved. The
instrument should be disposed in accordance with applicable national legislations or
regulations, respectively.
Details about all standards that are fulfilled are show in the tables below.
Not all options are available in all countries. For details please contact your local Siemens
Sales Organization.
21.1 Legal equipment standards and norms
Legal equipment standards and norms
Approval type Approval or certificate
EU directive 2014/30/EU per EN 61326-1 Class A Table 2 and
EN 61326-2-3 and
Electromagnetic
EN 61328-2-5 (PROFIBUS PA)
Compatibility
RCM in Australia/New Zealand: SITRANS FC meets the EMC requirements of the Australian
(EMC)
Communications and Media Authority (ACMA).
KC mark in Korea
EU directive 2014/35/EU (LVD) per:
▪ EN 61010 1
Low Voltage
▪ EN 61010 2 030
ANSI/UL 61010-1
CAN/CSA-C22.2 N0. 61010-1/US)
Approvals and declarations of conformity
A5E52748387-AA, 2023/09
FC7x0
171 / 180