Chapter 1 Getting Started
Power On/Off Procedures
1.3
Power On/Off Procedures
The CX100 is powered on and off using the Power button located on the front panel.
To Turn the Device ON
1.
Press and hold the Power button for approximately 3 seconds, then release.
2.
An initializing indicator screen is displayed during the boot-up process. Wait while the
device completes the boot-up process; this takes several seconds.
3.
The Home Screen is displayed when the device is ready for use.
To Turn the Device OFF
1.
Press and hold the Front Panel Power button for approximately 3 seconds, then
release.
2.
The device performs a series of power-down processes.
3.
When the power down process is finished, the front panel LEDs will no longer be
illuminated.
1.4
Device Control and Operation
The CX100 can be operated locally using the device's LCD touch screen and front panel
controls, or remotely using a VNC (Virtual Network Computing) viewing application.
1.4.1 LCD User Interface
The OneExpert User Interface (UI) is designed to be intuitive and easy to use. The Liquid
Crystal Display (LCD) is a capacitive touch screen that operates similarly to a mobile
device. The touch screen supports gestures such as press to open/select/activate, press
and hold, press and drag, swipe sideways and pinch to zoom.
1.4.2 Remote Operation
The CX100 can be controlled from a remote location such as a laptop using a VNC viewing
application.
Rev 000
1 - 6
CX100 ComXpert Test and Measurement Guide
22144016
October 2022