Manual Bypass Tray Adjustment; Lead Edge Erase Adjustment; Touch Panel Adjustment - Olivetti d-Color MF201 Service Manual

Field Service Ver. 1.0 Jun. 2008
10.3.7

Manual Bypass Tray Adjustment

See P.17 of the MB-502 service manual.
10.3.8

Lead Edge Erase Adjustment

Functions • To set the leading edge erase amount of the paper.
Use • Upon user requests, it is possible to specify the void area where image is not printed
along the leading edge.
Setting/ • The default setting is 4 mm.
Procedure
NOTE
• When "4 mm" is selected, 4.2 mm is the actual amount to be erased in print
based on the control system of the machine.
10.3.9

Touch Panel Adjustment

Functions • To adjust the position of the touch panel display
Use • Make this adjustment if the touch panel is slow to respond to a pressing action.
• Use during the setup procedure.
Setting/ 1. Call the Service Mode to the screen.
2. Touch [Machine Adjustment]
Procedure
3. Press four [+] keys displayed on the screen with pen, etc, according to the arrow
shown on the screen.
• Use care not to damage the screen surface with the tip of the pen.
NOTE
• When interrupting touch panel adjustment, press the Reset key or the Stop
key before pressing four [+] keys.
Interrupting adjustment returns the screen to the previous one without adjust-
ing the position.
Y109660-1
"4 mm" 5 mm
[Touch panel Adjustment].
Sevice Manual
10. Service Mode
7 mm
A02FF3E524DA
163