Hardware Installation; Connect The Power And Ground - Comtrol RocketLinx ES7506 User Manual

Hardware Installation

You can use the following subsections to install the RocketLinx ES7506:
•

Connect the Power and Ground

• Connect the Alarm Relay Output
• Mount the ES7506
• Connect the Ethernet Ports
• LED Descriptions on Page 12
Connect the Power and Ground
You can use the following procedure to connect power and the ground to the ES7506.
Power Input Voltage
PWR1/PWR2
PoE Output Voltage
Maximum PoE
Power/Port
Total Power Budget
Power Consumption
1. Connect the DC power inputs.
a. Insert positive and negative wires (12-24AWG) into the PWR+ and PWR- contacts.
Note: Power should be disconnected from the power supply before connecting it to the switch.
Otherwise, your screw driver blade can inadvertently short your terminal connections to the
grounded enclosure.
RocketLinx ES7506 User Guide: 2000529 Rev. F
on Page 11
on Page 11
on Page 12
Electrical Specifications
IEEE 802.3af Standard, Manual
IEEE 802.3af Ultra
Forced 15.4W
Forced 30W
IEEE 802.3af Standard, Manual
IEEE 802.3af Ultra
Forced
IEEE 802.3af Standard, Manual
IEEE 802.3af Ultra, Forced
Maximum
Maximum
Values
48 (48-57VDC)
55 (55-57VDC)
48 (48-57VDC)
55 (55-57VDC)
44-57V
50-57V
44-57V
15.4W
30W
Up to 100 W
8W without PD load
Hardware Installation - 9