Comtrol RocketLinx ES7506 User Manual page 119

Syntax poe powering-mode IEEE 802.3af/forced
802.3af: deliver power if and only if the attached PD comply with
IEEE 802.3af
Parameters
forced: deliver power no maater what PD attached
Command Mode Configuration mode
Set the Powering mode of PoE
Description
Set forced powering mode
EX 1:
Switch(config)# poe powering-mode forced
Switch(config)#
Examples
Set PoE port 2 to schedule mode.
EX 2:
Switch(config)# poe powering-mode 802.3af
Switch(config)#
Syntax poe control-mode user/schedule
user: user mode
Parameters
schedule: schedule mode
Command Mode Interface mode
Set the control mode of port
Description
Set PoE port 2 to user mode.
EX 1:
Switch(config)# interface fa2
Switch(config-if)# poe control-mode user
Examples
Set PoE port 2 to schedule mode.
EX 2:
Switch(config-if)# poe control-mode schedule
Syntax poe user enable/disable
enable: enable port in user mode
Parameters
disable: disable port in user mode
Command Mode Interface mode
Enable/Disable the PoE of the port in user mode.
If in schedule mode, it comes into affect when the control mode
Description
changes to user mode.
To enable the PoE function in user mode
Switch(config-if)# poe user enable
Examples
To disable the PoE function in user mode
Switch(config-if)# poe user disable
RocketLinx ES7506 User Guide: 2000529 Rev. F
Configuration Using the Command Line Interface (CLI)
Power over Ethernet (CLI) - 119