Table of Contents
Advertisement
Introduction
Overview
The RocketLinx ES7506 is designed for industrial PoE applications such as IP surveillance or wireless access
points, where the power source is not conveniently located. The ES7506 provides:
•
Four 10/100BASE-TX Power over Ethernet Plus ports
•
Two redundant 10/100BASE-TX uplink ports
The ES7506 supports intelligent PoE control and schedule management. Each of the four PoE ports can be
configured in a weekly schedule by hourly basis and PoE on/off can be remotely controlled via SNMP and web
user interface.
It is compliant to both IEEE 802.3af PoE as well as the pioneer standard of IEEE 802.3at PoE Plus designed
for boosting PoE delivery up to 30W in each of the four PoE ports. The ES7506 can auto-detect 24V and 48V
power input and can deliver 24V and 48V PoE outputs which allow more applications where 48VDC is not an
option.
The two uplink ports can be configured as Redundant Ring ports recovering network failure in less than 5ms,
or RSTP ports integrating with other standard switches. Full network management features such as SNMP
v3, QoS, IGMP v3 are all supported. If the powered device fails to respond after a pre-configured time
interval, the ES7506 will reboot the powered device and continue to monitor the powered device in every pre-
configured time interval. Also, unmanageable powered devices can be managed through the ES7506.
The IP31 rigid aluminum flat casing and wide operation temperature range ensure reliable operation in
places such as mass transit vehicles or outdoor usage.
Detailed specifications are available for the ES7506.
RocketLinx ES7506 User Guide: 2000529 Rev. F
Introduction - 7
Advertisement
Table of Contents
