Table of Contents
Advertisement
Configuration Using the Command Line Interface (CLI)
Using a Telnet/SSH Console
The ES7506 supports a Telnet console or SSH console with the Command Line Interface (CLI), which is the
same as what you see using the RS-232 console port. The SSH connection can secure all the configuration
commands you send to the ES7506.
SSH is a client/server architecture while the ES7506 is the SSH server. When you want to make SSH
connection with the ES7506, you can use PortVision DX or download an SSH client tool.
The next discussion provides procedures to use PortVision DX with a Telnet or SSH connection.
You can use PortVision DX to access the CLI using the following procedure.
1. If you have not done so, install PortVision DX
2. Start PortVision DX.
3. Right-click the ES7506 in the Device List pane (lower) and click Telnet/SSH.
4. Select either Telnet or SSH and leave the default port number.
98 - Using a Telnet/SSH Console
(Installing PortVision DX
RocketLinx ES7506 User Guide: 2000529 Rev. F
on Page 15).
Advertisement
Table of Contents
