Table of Contents
Advertisement
Configuration Using the Command Line Interface (CLI)
Using the Serial Console
Comtrol provides one RS-232 RJ45 console cable with the ES7506.
Note: A system COM port is required to use a serial console connection. If you do not have an available COM
port, use the
Using a Telnet/SSH Console
1. Attach the RS-232 DB9 connector to your PC COM port and connect the other end to the Console port of
the ES7506. If you misplace the cable, you can use this console cable pin assignment or purchase a null-
modem cable.
2. Start a terminal program such as HyperTerminal or the Comtrol
Test Terminal program. You can download Test Terminal from the
FTP
site.
•
Test Terminal
- WCom2 (Windows XP through Windows 8)
-
Unzip Test Terminal and place it in a location that you can
execute an application.
-
Execute Wcom2.exe.
-
Click the File menu, the Open Port option and then click the
appropriate COM port number.
-
Click Settings, use the values in the following table, and
then click Ok.
Serial Settings
Baud Rate
Data bits
Parity
Stop Bit
Flow Control
-
Click Ok.
-
Press the cursor in the Terminal window and press the
Enter key.
96 - Using the Serial Console
procedure on
RJ45
DB9F
Pin
Pin
1
7
2
9
3
4
4
5
5
1
6
3
7
2
8
8
Value
9600
8
None
1
None
Page
98.
Pin 1
Pin 5
Pin 9
Pin 6
RocketLinx ES7506 User Guide: 2000529 Rev. F
Advertisement
Table of Contents
