Saving To Flash (Cli); Logging Out (Cli); Service (Cli) - Comtrol RocketLinx ES7506 User Manual

Saving to Flash (CLI)

Save Configuration allows you to save any configuration you just made to the flash. Powering off the switch
without saving the configuration causes loss of the new settings.
Saving to Flash
Save to Flash

Logging Out (CLI)

The CLI connection logs out of configure terminal mode, if you do not input any command after 30 seconds.
Logging Out
Logout

Service (CLI)

The service command provides the ability to disable HTTP and Telnet.
Note: There is not a web user interface page for the service command.
Service
Disable HTTP
Enable HTTP
Disable telnet
Enable telnet
RocketLinx ES7506 User Guide: 2000529 Rev. F
SWITCH# write
Building Configuration...
[OK]
Switch# copy running-config startup-config
Building Configuration...
[OK]
SWITCH> exit
SWITCH# exit
Switch(config)# service http disable
Switch(config)#
Switch(config)# service http enable
Switch(config)#
Switch(config)# service telnet disable
Switch(config)#
Switch(config)# service telnet enable
Switch(config)#
Configuration Using the Command Line Interface (CLI)
Saving to Flash (CLI) - 141