Table of Contents
Advertisement
Configuration Using the Web Interface
Backup the Configuration - TFTP Server Method
You must use a TFTP server to create or load backup files if you are using Windows Server 2003 through
Windows 8.1 or PortVision DX. If you do not have a TFTP server, you can download one from Comtrol using
the
Start the TFTP Server
Start the TFTP Server
Use this procedure to download either the 32-bit or the 64-bit version from Comtrol.
1. If necessary, download the appropriate .zip file for your operating system from:
contribs/free_3rd_party_utils/tftp_server/ to your system and unzip the file.
2. Execute the TFTP server application, click Allow access, and the TFTP server opens.
3. Leave the TFTP server open and go to
Note: You will need the TFTP Server IP address in the next
procedure.
Create a Backup File
You must have a TFTP server open.
1. Open the web user interface for the ES7506 and open the
Backup and Restore page under Basic Settings.
2. Select TFTP Server for the Backup Configuration, enter the IP
address of the TFTP server, enter a Backup File Name, and
click the Backup button.
Note: You cannot use spaces in the path to the target file.
3. Click Ok to close the popup message.
The backup file is located in the same directory that the TFTP server resides.
54 - Backup the Configuration - TFTP Server Method
subsection.
Create a Backup File
ftp://ftp.comtrol.com/
on Page 54..
TFTP Server IP Address
RocketLinx ES7506 User Guide: 2000529 Rev. F
Advertisement
Table of Contents
