Table of Contents
Advertisement
Configuration Using the Command Line Interface (CLI)
Backup and Restore
Backup Startup
Configuration File
Restore Configuration
Show Startup
Configuration
Show Running
Configuration
112 - Basic Settings (CLI)
Switch# copy startup-config tftp: 192.168.250.33/
default.conf
Writing Configuration [OK]
Note: To backup the latest startup configuration file, you should save current
settings to flash first. You can refer to
how to save settings to the flash.
In the example above, 192.168.250.33 is the TFTP server's IP and
default.conf is name of the configuration file. Your environment may use
different IP addresses or different file name. Type target TFTP server IP
or file name in this command.
Switch# copy tftp: 192.168.250.33/default.conf startup-
config
Switch# show startup-config
Switch# show running-config
Save to Flash
on Page 93 to see
RocketLinx ES7506 User Guide: 2000529 Rev. F
Advertisement
Table of Contents
