Table of Contents
Advertisement
INTRODUCTION
The RocketLinx ES8510, ES8510-XT, and ES8510-XTE are managed industrial
Ethernet switches with:
•
Seven 10/100BASE-TX ports
•
Three combo RJ45/SFP ports
•
ES8510/ES8510-XT: 10/100BASE-TX (RJ45) or 100BASE-FX/
1000BASE-SX/LX/LHX/XD/ZX (SFP) Gigabit ports (standard mini GBIC
SFPs)
•
ES8510-XTE: 10/100BASE-TX (RJ45) or 100BASE-FX (SFP) ports
(standard mini GBIC SFPs)
When the SFP is active and installed, the corresponding RJ45 port is
deactivated. For example, if an SFP is installed and active on the SFP Port 8,
the corresponding RJ45 Port 8 becomes inactive.
The ES8510 is encased with a rugged aluminum housing for industrial
environments:
•
ES8510 provides a wide operating temperature
•
ES8510-XT/ES8510-XTE are NEMA TS2 certified and provide an extended
operating temperature
The ES8510, ES8510-XT, and ES8510-XTE are referred to as the ES8510 unless
there is a difference between the models.
See the Comtrol website for complete product specifications.
INSTALLATION OVERVIEW
If you need more detailed installation and configuration information, you
can download the appropriate User Guide, which can be located at http://
downloads.comtrol.com
Wiring the Power Inputs
The ES8510 provides redundant power, reverse polarity protection, and
accepts a positive or negative power source but PW1 and PW2 must apply
to the same mode. The ES8510 can be configured to signal an alarm for loss
of power in either PW1 or PW2 using the web interface or Command Line
Interface (CLI).
1
Advertisement
Table of Contents
