Table of Contents
Advertisement
Using PortVision DX
Configuring Multiple RocketLinx Switches Network Addresses
You can configure the network addresses for multiple ES7506 switches using the Assign IP to Multiple Devices
option.
In addition, you can also configure common settings for the ES7506 web page and save the settings to a
configuration file that you can load to all or selected ES7506 switches. See
25 for more information.
You can use this procedure if your ES7506 is connected to the host PC, laptop, or if the ES7506 resides on the
local network segment. Use the following steps to configure multiple ES7506 switches.
1. Shift-click the ES7506 switches for which you want to
program network information, right-click, and click
Advanced > Assign IP to Multiple Devices.
2. Enter the starting IP address, subnet mask, IP Gateway
and click Proceed.
PortVision DX displays the programmed IP addresses in
the Device List pane after the next refresh cycle.
22 - Configuring Multiple RocketLinx Switches Network Addresses
Using Configuration Files
RocketLinx ES7506 User Guide: 2000529 Rev. F
on Page
Advertisement
Table of Contents
