Table of Contents
Advertisement
IP Configuration
This function allows you to configure the ES7506's IP address settings.
IP Configuration Page
You can select to Enable or Disable the DHCP Client
function. When the DHCP Client function is enabled,
an IP address is assigned to the switch from the
DHCP Client
network's DHCP server. In this mode, the default IP
address is replaced by the one assigned by DHCP
server. If DHCP Client is disabled, then the IP address
that you specified is used.
You can assign the IP address reserved by your
network for the ES7506. If the DHCP Client function is
enabled, you do not need to assign an IP address to the
IP Address
ES7506, because it is overwritten by the DHCP server
and displays here. The default IP Address is
192.168.250.250.
You can assign the subnet mask for the IP address
here. If the DHCP Client function is enabled, you do
not need to assign the subnet mask. The default
Subnet Mask is 255.255.255.0.
Subnet Mask
Note: In the CLI, the enabled bit of the subnet mask is
You can assign the gateway for the switch here. The
default gateway is 192.168.250.1.
Default Gateway
Note: In the CLI, use 0.0.0.0/0 to represent the default
Click Apply to apply the settings.
Note: You must Save the settings
Apply
RocketLinx ES7506 User Guide: 2000529 Rev. F
used to represent the number displayed in the
web management interface. For example, 8
represents: 255.0.0.0,16 represents: 255.255.0.0,
24 represents: 255.255.255.0.
gateway.
want to maintain these settings if the ES7506 is
powered off.
Configuration Using the Web Interface
(Page
93), if you
IP Configuration - 45
Advertisement
Table of Contents
