Comtrol RocketLinx ES7506 User Manual page 124

Configuration Using the Command Line Interface (CLI)
Redundant Ring
Switch(config)# redundant-ring 1
Ring 1 created
Create or
Switch(config-redundant-ring)#
configure a Ring
Note: 1 is the target Ring ID which is going to be created or configured.
Switch(config-redundant-ring)# version
default
rapid-super-ring
Super Ring
Version
super-ring
Switch(config-redundant-ring)# version rapid-super-ring
Switch(config-redundant-ring)# priority
<0-255>
Priority
default
Switch(config-redundant-ring)# super-ring priority 100
Switch(config-redundant-ring)# port
IFLIST
Ring Port
cost
Switch(config-redundant-ring)# port fa1,fa2
124 - Network Redundancy (CLI)
set default to Redundant ring
rapid super ring
super ring
valid range is 0 to 255
set default
Interface list, ex: fa1,fa3-5
path cost
RocketLinx ES7506 User Guide: 2000529 Rev. F