Table of Contents
Advertisement
•
HyperTerminal (Windows XP, unless installed manually)
-
Windows XP: Go to Start -> Program -> Accessories -> Communications -> HyperTerminal
-
Enter a name for the new console connection and click OK.
-
Enter the IP address in the Host Address text box.
-
Select TCP/IP (Winsock) in the Connect using drop-list and click Ok.
-
Set the serial settings using the
-
Press the Enter key in the Terminal window.
-
After it is connected, you can see the Switch login request, go to
3. Log in to the switch. The default user name is admin, password, admin.
Switch login: admin
Password:
Switch (version 2.3-20140127-18:03:09).
Switch>
4. If necessary, configure the IP address for your network. The following example shows how to program an
IP address of 192.168.11.252 with a Class B subnet mask (255.255.0.0).
Switch> enable
Switch# configure terminal
Switch(config)# int vlan1
Switch(config-if)# ip address 192.168.11.252/16
RocketLinx ES7506 User Guide: 2000529 Rev. F
Configuration Using the Command Line Interface (CLI)
Serial Settings
table (above).
Step 3
Using the Serial Console - 97
Advertisement
Table of Contents
