Table of Contents
Advertisement
4. Enter the user name, the password, and click OK. The
default user name and password are both admin.
The Welcome page of the web management interface
then appears.
5. If you have not done so, you can change the ES7506 IP address to meet your network environment.
a. Double-click Basic Setting.
b. Click IP Configuration.
To use static addressing, enter a valid IP add dress, subnet mask and default gateway.
To use DHCP, click Enable in the DHCP Client drop list.
c.
Click Apply.
6. If you are planning on connecting PDs, configure the PoE port characteristics, see
You can use the
Feature Overview
RocketLinx ES7506 User Guide: 2000529 Rev. F
on Page 37 to locate other features that you may want to configure.
Configuration Using the Web User Interface
PoE Control
Web User Interface - 33
on Page 62.
Advertisement
Table of Contents
