Table of Contents
Advertisement
Configuration Using the Command Line Interface (CLI)
DHCP Server
DHCP Server configuration
Lease time configure
DHCP Relay Agent
Show DHCP server
information
DHCP Commands
110 - Basic Settings (CLI)
Enable DHCP Server on ES7506 Switch
Switch#
Switch# configure terminal
Switch(config)# router dhcp
Switch(config-dhcp)# service dhcp
Configure DHCP network address pool
Switch(config-dhcp)#network 50.50.50.0/4 -(network/mask)
Switch(config-dhcp)#default-router 50.50.50.1
Switch(config-dhcp)#lease 300 (300 sec)
Enable DHCP Relay Agent
Switch#
Switch# configure terminal
Switch(config)# router dhcp
Switch(config-dhcp)# service dhcp
Switch# show ip dhcp server statistics
DHCP Server ON
Address Pool 1
network:192.168.17.0/24
default-router:192.168.17.254
lease time:300
Excluded Address List
IP Address
---------------
(list excluded address)
Manual Binding List
IP Address
---------------
--------------
(list IP & MAC binding entry)
Leased Address List
IP Address
---------------
--------------
(list leased Time remain information for each entry)
Switch(config)# router dhcp
Switch(config-dhcp)#
default-router DHCP Default Router
end
Exit current mode and down to previous enable mode
exit
Exit current mode and down to previous mode
ip
IP protocol
lease
DHCP Lease Time
list
Print command list
network
dhcp network
no
Remove
quit
Exit current mode and down to previous mode
service
Enable service
MAC Address
MAC Address
Leased Time Remains
--------------------
RocketLinx ES7506 User Guide: 2000529 Rev. F
Advertisement
Table of Contents
