Related Manuals for Aruba Instant
Summary of Contents for Aruba Instant
- Page 1 Aruba Instant Quick Start Guide www.arubanetworks.com 1344 Crossman Avenue Sunnyvale, California 94089 Phone: 408.227.4500 Fax 408.227.4550 Aruba Instant | Quick Start Guide Part Number 0511764-01 | April 2015...
-
Page 2: Getting Started
Aruba Instant Quick Start Guide This Quick Start Guide assists you to quickly connect and configure Aruba Instant. To learn more about Aruba Instant and for detailed configuration information, see Aruba Instant User Guide. Getting Started Unpack and Power on IAP After unpacking the Instant Access Point (IAP), check the power requirements and connect the IAP. - Page 3 1. Using a wireless client, scan the wireless networks and connect to the instant SSID. 2. Using a web browser, go to http://instant.arubanetworks.com. 3. Log in to the Instant UI with admin and admin as username and password respectively. Aruba recommends that you change the administrator credentials after the initial configuration.
- Page 4 Network. If AirWave is deployed for managing the netwok, perform the following steps. a. Click Set Up Now at the bottom of the Instant UI to configure AirWave. The System window appears. b. Click the Admin tab. In the AirWave section, enter the Shared Key and AirWave IP details.
- Page 5 Employee, Guest, or Voice, see Aruba Instant User Guide. Verifying the Operating Status After setting up an IAP and creating a wireless networks, use the Instant UI or the LEDs to verify the operating status. Verifying Status Using LEDs You can use the LEDs to verify that both radios are active after the AP initialization and configuration.
- Page 6 To verify that the wireless network is available and the SSID is broadcasted, perform the following steps: 1. Verify that the newly created network is displayed in the Networks window. 2. Disconnect the client from instant, the default provisioning network to which your client system is connected.
- Page 7 Aruba Mobility Controller. To convert an IAP through the Instant UI, perform the following steps: 1. Log in to the Instant UI with the administrator credentials. 2. Click the Maintenance link at the top right corner of the Instant main window. 3. Click the Convert tab.
-
Page 8: Contacting Support
VPN client devices constitutes complete acceptance of liability by that individual or corporation for this action and indemnifies, in full, Aruba Networks, Inc. from any and all legal actions that might be taken against it with respect to infringement of copyright on behalf of those vendors.
Need help?
Do you have a question about the Instant and is the answer not in the manual?
Questions and answers