Table of Contents
Advertisement
The AP-220 Series is equipped with five LEDs that indicate the status of the various components of the AP.
Table 1 AP-220 Series Series LED Meanings
LED
PWR
ENET0, ENET1
5GHz
2.4GHz
External Antenna Connectors
The AP-224 is equipped with three external antenna connectors. The connectors are labeled ANT0, ANT1, and
ANT2, and correspond to radio chains 0, 1, and 2.
Figure 2
2
Color/State
Off
Red
Flashing
Green
Orange
Off
Amber - Steady
Green - Steady
Flashing
Off
Amber - Steady
Green - Steady
Flashing - Green
Off
Amber - Steady
Green - Steady
Flashing - Green
AP-224 External Antenna Connectors)
ANT0
Meaning
No power to the AP
Error Condition
Device booting, not ready
Device operating in unrestricted mode
Device operating in power-saving mode
Ethernet link unavailable
10/100Mbps Ethernet link established
1000Mbps Ethernet link established
Ethernet link activity
5GHz radio disabled
5Ghz radio enabled in non-HT WLAN mode
5Ghz radio enabled in HT WLAN mode
5Ghz Air or Spectrum Monitor
2.4GHz radio disabled
2.4Ghz radio enabled in non-HT WLAN mode
2.4Ghz radio enabled in HT WLAN mode
2.4Ghz Air or Spectrum Monitor
ANT1
ANT2
Aruba 220 Series Access Points | Installation Guide
Advertisement
Table of Contents
