Table of Contents
Advertisement
User's manual – AWS-100
The diskette labeled "Utility Diskette", that comes with the package contains a utility program
for the AWS-100 Wireless Access Point. Any updates can be downloaded from
Addtron's Web site at
http://www.addtron.com
Warning: Backup your utility diskette and use the copy as the working diskette to
protect the original from accidental damage.
The AWS-100 can be configured over an Ethernet network using RJ-45 cable or wireless
device that link to this AP. You may connect the AWS-100 to a network device such as a
hub or switch. Then, run the utility program, and configure the AWS-100 remotely as
described below.
1.
Insert the AWS-100 utility disk into the floppy drive on your PC, and then enter the
following command: A:\utility\setup.exe. Follow the on-screen instructions to install the
utility program.
2.
When you run the installed utility click on "AP" and then select "Scan" from the menu, the
program will then detect all the AWS-100s wired to the Ethernet network
Windows NT/95/98/ME/2000 Installation
8
Configuration
Advertisement
Table of Contents
