Show Mls Qos Vlan - Cisco Catalyst 3750-X Command Reference Manual

show mls qos vlan

show mls qos vlan
Use the show mls qos vlan user EXEC command to display the policy maps attached to a switch virtual
interface (SVI).
Syntax Description vlan-id
Command Modes
User EXEC
Command History Release
12.2(53)SE2
Usage Guidelines The output from the show mls qos vlan command is meaningful only when VLAN-based quality of
service (QoS) is enabled and when hierarchical policy maps are configured.
Examples This is an example of output from the show mls qos vlan command:
Switch> show mls qos vlan 10
Vlan10
Attached policy-map for Ingress:pm-test-pm-2
Related Commands Command
policy-map
Catalyst 3750-X and 3560-X Switch Command Reference
2-768
show mls qos vlan vlan-id
Specify the VLAN ID of the SVI to display the policy maps. The range is 1 to
4094.
Modification
This command was introduced.
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
Description
Creates or modifies a policy map that can be attached to
multiple ports and enters policy-map configuration mode.
OL-29704-01