Show Mls Qos Vlan - Cisco Catalyst 3750 Command Reference Manual

show mls qos vlan

show mls qos vlan
Use the show mls qos queue-set user EXEC command to display the policy maps attached to a switch
virtual interface (SVI).
Syntax Description vlan-id
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History Release
12.2(25)SE
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show mls qos queue-set command:
Switch> show mls qos vlan 10
Vlan10
Attached policy-map for Ingress:pm-test-pm-2
Related Commands Command
policy-map
Catalyst 3750 Switch Command Reference
2-432
show mls qos vlan vlan-id [ | {begin | exclude | include} expression]
Display the policy maps for the specified VLAN. The range is 1 to 4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
Description
Creates or modifies a policy map that can be attached to
multiple ports and enters policy-map configuration mode.
78-16181-03