Show Arp Access-List - Cisco Catalyst 3750-X Command Reference Manual

show arp access-list

show arp access-list
Use the show arp access-list user EXEC command to display detailed information about Address
Resolution Protocol (ARP) access control (lists).
Syntax Description acl-name
Command Modes
User EXEC
Command History Release
12.2(53)SE2
Examples
This is an example of output from the show arp access-list command:
Switch> show arp access-list
ARP access list rose
Related Commands Command
arp access-list
deny (ARP access-list
configuration)
ip arp inspection filter vlan
permit (ARP access-list
configuration)
Catalyst 3750-X and 3560-X Switch Command Reference
2-564
show arp access-list [acl-name]
(Optional) Name of the ACL.
Modification
This command was introduced.
permit ip 10.101.1.1 0.0.0.255 mac any
permit ip 20.3.1.0 0.0.0.255 mac any
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
Description
Defines an ARP ACL.
Denies an ARP packet based on matches against the Dynamic Host
Configuration Protocol (DHCP) bindings.
Permits ARP requests and responses from a host configured with a
static IP address.
Permits an ARP packet based on matches against the DHCP bindings.
OL-29704-01