Authentication Method And Port Mode Support - Cisco 500 Series Administration Manual

Security: 802.1X Authentication

Authentication Method and Port Mode Support

Authentication Method and Port Mode Support
NOTE
Cisco 500 Series Stackable Managed Switch Administration Guide
The following table shows which combinations of authentication method and port
mode are supported.
Authentication Methods and Port Modes
Authentication Single-host
Method
802.1x †
MAC †
WEB N/S
Legend:
†—The port mode also supports the guest VLAN and RADIUS-VLAN assignment.
N/S—The authentication method does not support the port mode.
Web-based authentication requires TCAM support for input traffic classification
and can be supported only by the full multi-sessions mode. You can simulate the
single-host mode by setting Max Hosts parameter to 1 in the Port Authentication
page.
Multi-host Multi-sessions
Device in L3
† †
† †
N/S N/S
22
Device in L2
†
†
†
508