Authentication Command Bounce-Port Ignore - Cisco Catalyst 3560X-24P Command Reference Manual

authentication command bounce-port ignore

authentication command bounce-port ignore
Use the authentication command bounce-port ignore global configuration command on the switch
stack or on a standalone switch to allow the switch to ignore a command to temporarily disable a port.
Use the no form of this command to return to the default status.
Syntax Description
This command has no arguments or keywords.
Defaults
The switch accepts a RADIUS Change of Authorization (CoA) bounce port command.
Command Modes Global configuration
Command History Release
12.2(53)SE2
Usage Guidelines The CoA bounce port command causes a link flap, which triggers a DHCP renegotiation from the host.
This is useful when a VLAN change occurs and the endpoint is a device such as a printer, that has no
supplicant to detect the change. Use this command to configure the switch to ignore the bounce port
command.
Examples
This example shows how to instruct the switch to ignore a CoA bounce port command:
Switch(config)# authentication command bounce-port ignore
Related Commands Command
authentication command
disable-port ignore
Catalyst 3750-X and 3560-X Switch Command Reference
2-22
authentication command bounce-port ignore
no authentication command bounce-port ignore
Modification
This command was introduced.
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
Description
Configures the switch to ignore a CoA disable port command.
OL-21522-02