Boot Enable-Break - Cisco Catalyst 3750-X Command Reference Manual

boot enable-break

boot enable-break
Use the boot enable-break global configuration command on a standalone switch to enable interrupting
the automatic boot process. Use the no form of this command to return to the default setting.
Syntax Description
This command has no arguments or keywords.
Defaults Disabled. The automatic boot process cannot be interrupted by pressing the Break key on the console.
Command Modes Global configuration
Command History Release
12.2(53)SE2
Usage Guidelines This command works properly only from a standalone switch in a stack.
When you enter this command, you can interrupt the automatic boot process by pressing the Break key
on the console after the flash file system is initialized.
Despite the setting of this command, you can interrupt the automatic boot process at any time by pressing
Note
the MODE button on the switch front panel.
This command changes the setting of the ENABLE_BREAK environment variable. For more
information, see
Related Commands Command
show boot
Catalyst 3750-X and 3560-X Switch Command Reference
2-76
boot enable-break
no boot enable-break
Modification
This command was introduced.
Appendix A "Catalyst 3750-X and 3560-X Switch Boot Loader Commands."
Description
Displays the settings of the boot environment variables.
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
OL-29704-01