Boot Enable-Break - Cisco ME 3400 Command Reference Manual

boot enable-break

boot enable-break
Use the boot enable-break global configuration command to enable interrupting the automatic boot
process. Use the no form of this command to return to the default setting.
Syntax Description
This command has no arguments or keywords.
Defaults Disabled. The automatic boot process cannot be interrupted by pressing the Break key on the console.
Command Modes Global configuration
Command History Release
12.2(25)EX
Usage Guidelines When you enter this command, you can interrupt the automatic boot process by pressing the break key
on the console after the flash file system is initialized. The break key is different for each operating
system:
•
•
This command changes the setting of the ENABLE_BREAK environment variable. For more
information, see
Related Commands Command
show boot
Cisco ME 3400 Ethernet Access Switch Command Reference
2-22
boot enable-break
no boot enable-break
Modification
This command was introduced.
On a SUN work station running UNIX, Ctrl-C is the break key.
On a PC running Windows 2000, Ctrl-Break is the break key.
Appendix A, "Cisco ME 3400 Ethernet Access Switch Boot Loader Commands."
Description
Displays the settings of the boot environment variables.
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
OL-9640-10