Projector Weight - Barco Prometheus I Safety & Instruction Manual

2. General
Exhaust outlet for external fan
The exhaust outlet has an output voltage of 200–240V at 50–60 Hz; switched and maximum 3 amperes is allowed.
The connection between the exhaust outlet and the external blower must be done with a certified AC power supply cord of minimum
0,75 mm² or 18 AWG and minimum 300V.
C
AUTION
any other device than an external exhaust fan. Maximum allowed current : 3A.

Projector weight

Do not underestimate the weight of the Prometheus. The projector weights about ±133 kg (±293 lb.) without lens. Be sure that the
pedestal on which the projector has to be installed is capable of handling five (5) times the complete load of the system.
Measures to resolve radio interference
Operation of this equipment in a residential area may cause radio interference. Possible interference shall be solved by one of the
following non limitative product installation measures:
• Create more separation distance between projector and interfered device.
• Change direction of the interfered device.
• Electromagnetic shielding of the projection booth.
No interference to radio communication in neighbor buildings possible if a separation distance of 30 m (32.8
yards) is provided.
Barco offers a pedestal for the Prometheus. This universal pedestal allows a solid and easy setup of the
projector. The universal pedestal has a separate compartment to install the UPS unit for the Prometheus.
Futhermore, the universal pedestal contains a standard 19" rack to build in the projector peripherals such as
alternative content switchers (e.g. ACS-2048)
16
:
The 200–240V power outlet (exhaust outlet) of the projector may not be used to provide power to
R5905963 PROMETHEUS SERIES 09/03/2015