Barco Prometheus I Safety & Instruction Manual page 66

4. Lamp & Lamp House
Image 4-43
10.Secure the UV blocker by fastening the four quarter turn screws (reference 5 image 4-44) as illustrated.
Note: Ensure that the quarter turn screws turning wires are flush with the cover or interference will occur while inserting the
Lamp House into the projector.
5
Image 4-44
11. Install the side cover of the Lamp House and fasten the three quarter turn screws (reference 4 image 4-45) of the cover.
Note: Please ensure that the quarter turn screws turning wires are flush with the cover or interference will occur while inserting
the Lamp House into the projector.
Image 4-45
12.Secure the xenon lamp cathode with the hexagon socket head cap screw (reference 1 image 4-46), spring washer (reference 2
image 4-46) and plain washer (reference 3 image 4-46). Fasten the screw with a torque of 5 Nm (3,7 lbf*ft). Use a torque wrench
with a 5 mm Allen socket.
Caution: Make sure that both pins (reference 11 image 4-46) of the cathode adapter remain engaged in the foreseen slots.
62
12
R5905963 PROMETHEUS SERIES 09/03/2015
4