Projector Weight - Barco DP2K-32B Installation Manual

Exhaust outlet for external fan
The exhaust outlet has an output voltage of 200–240V at 50–60 Hz; switched and maximum 3 amperes is allowed.
The connection between the exhaust outlet and the external blower must be done with a certified AC power supply cord of minimum
0,75 mm² or 18 AWG and minimum 300V.
C
AUTION
any other device than an external exhaust fan. Maximum allowed current : 3A.

Projector weight

Do not underestimate the weight of the Barco DP2K-32B. The projector weights about ±140 kg (±309 lb.) without lens. Be sure that
the pedestal on which the projector has to be installed is capable of handling five (5) times the complete load of the system.
Barco offers a pedestal for the DP2K-32B. This universal pedestal allows a solid and easy setup of the projec-
tor. The universal pedestal has a separate compartment to install the UPS unit for the DP2K-32B. Futhermore,
the universal pedestal contains a standard 19" rack to build in the projector peripherals such as alternative
content switchers (e.g. ACS-2048)
R59770491 DP2K-32B 30/04/2010
:
The 200–240V power outlet (exhaust outlet) of the projector may not be used to provide power to
2. General
11