Barco Prometheus I Safety & Instruction Manual page 72

4. Lamp & Lamp House
6. Adjust the X-axis (ref X image 4-53), the Y-axis (ref Y image 4-53) and the Z-axis (ref Z image 4-53) for maximum current light
output (Footlambert Measured). Carefully turn the thumbscrew for maximum light output. Once over the maximum, turn slightly
in opposite direction to reach the maximum light output again. Do this for each direction and repeat this adjustment cycle twice.
Z
Image 4-53
Realignment points
7. If lock nuts are available, these nuts can be locked again.
8. Switch of the projector.
9. Reinstall the lamp cover.
68
Y
X
R5905963 PROMETHEUS SERIES 09/03/2015