Making A Call; Listen Before Transmit Mode - Codan 2110 series Reference Manual

Manpack transceiver
Hide thumbs Also See for 2110 series:
Table of Contents

Advertisement

Making and receiving calls

Making a call

Listen Before Transmit Mode

NOTE
The 2110 series Manpack Transceiver is capable of listening to a channel before
initiating a call on the channel. If the Cfg LBT Mode in the Control List is enabled, the
transceiver detects whether or not there is traffic on the selected channel. The transceiver
listens on a channel for the length of time specified in the Cfg LBT Period entry in the
Control List. If there is traffic on the channel, the transceiver reports that the channel is
occupied.
The Cfg LBT Mode may be set to Enabled, Override allowed, or Disabled.
When the Cfg LBT Mode is set to Enabled and the transceiver detects that the channel
tried is occupied, it prompts you to try the call again. You can:
NOTE
When the Cfg LBT Mode is set to Override allowed and the transceiver detects that
the channel tried is occupied, it prompts you to try the call again. You can:
Calls using the Emergency call type or calls made through the
Mode if it is enabled at either level.
When the Cfg LBT Mode is set to Disabled the transceiver does not test the channel.
202
If you change the setting in the Cfg LBT Mode entry in the Control List,
you must switch the transceiver off then on again for the change to take
effect.
press CALL to try the call again using LBT
press
to select a new channel, then press CALL to make a call on this channel
using LBT
If only one channel was tried and found to be occupied using LBT, you
can listen for traffic on the channel then, if clear, override LBT by holding
CALL.
press CALL to try the call again using LBT
hold CALL to try the call again without LBT (send the call regardless of any
detected traffic)
press
to select a new channel, then press CALL to make a call on this channel
using LBT
hold
to select a new channel and try the call on this channel without LBT (send
the call regardless of any detected traffic)
key override the LBT
Manpack Transceiver 2110 series Reference Manual

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2110 series and is the answer not in the manual?

Table of Contents

Save PDF