Displaying The Gps Screen - Codan 2110 series Reference Manual

Displaying the GPS screen

To display the GPS screen:
1
1
Manpack Transceiver 2110 series Reference Manual
Press GPS.
The GPS screen is displayed. For example:
If no data is displayed on the GPS screen, the transceiver has not
received any valid GPS data. If you are using an external GPS
NOTE receiver, check that the GPS receiver is connected correctly to the
transceiver, and that the mode and speed for the serial port have been
set correctly (see
If you want to view GPS readings in seconds rather than decimal
NOTE minutes, use the #$! GPSS command in the Message 10 entry (see
page 482, Enabling GPS format
Press GPS to return to the screen from which you began.
page 260, Setting up the
options).
The Control List
transceiver).
261