Codan 2110 series Reference Manual page 469

Table 69:
Response message
SELCALL: <channel>, <caller
address>, <self address>,
<date> <time>
SELFID-LIST: <self address>[,
<self address>]
SIDEBAND: AM|LSB|USB
SOUNDING: FAILED
SOUNDING: FINISHED
SOUNDING: OFF
SOUNDING: ON
SOUNDING: STARTED <self
address>@<network>
STATUS-ACK: <channel>, <caller
address>, <self address>,
<date> <time>, "<message>"
STATUS-CALL: <channel>, <caller
address>, <self address>,
<date> <time>, "<message>"
STATUS-CALL-ACK: <channel>,
<caller address>, <self
address>, <date> <time>,
"<message>"
STATUSTIME: <n>
TEL-CALL: <channel>, <caller
address>, <self address>,
<date> <time>, <telephone
number>|DISCONNECTED
Manpack Transceiver 2110 series Reference Manual
CICS response messages (cont.)
Description
A Selective call has been received.
The list of current self addresses used by the CICS
interface.
The sideband for the current channel.
The ALE sounding operations have been aborted before
completion.
The ALE sounding operations have been completed.
The ALE sounding operations have been disabled.
The ALE sounding operations have been enabled.
The ALE sounding operations have commenced.
An acknowledgment response for a Get Status call has
been requested and sent.
A request message for a Get Status call has been received.
An acknowledgment response for a Get Status call has
been requested and sent.
The current timeout value, where n is the amount of time
(in seconds) the receiving station has to respond to a Get
Status call.
A Phone call has been received or disconnected.
Operating the transceiver from a computer
453