Setting The Basics; Setting The Time And Date - Codan 2110 series Reference Manual

Operating the transceiver

Setting the basics

Setting the time and date

NOTE
When the transceiver leaves the factory it is set to UTC time with a time zone offset of
zero. To set your local time and date you must enter your time zone offset from UTC
time, then adjust the local time and date if necessary. This feature is useful if you have a
network that spreads over several time zones, or you need to time stamp your
transmissions according to the current time at longitude zero.
Setting the time zone offset
To set your time zone offset from UTC time:
1
1
1
1
1
1
90
In the following discussion, you must log in as administrator to see the
Main Menu (see
until Main Menu is displayed.
Press
Scroll to Control, then press
Scroll to Time..., then press
Scroll to Zone Offset, then hold
Scroll to the correct time zone offset for your location, then press
Press until Main Menu is displayed.
page 128, Logging in to admin level from user
.
.
.
Manpack Transceiver 2110 series Reference Manual
level).
.