Codan 2110 series Reference Manual page 179

1
Renaming a NET
When you rename a NET, references to the NET in other lists are not automatically
updated; you must go to the Address List to update any entries that refer to the NET.
For example, if the NET you renamed is used in an entry in the Address List, go to this
entry, find the reference to the old NET name, then change it so that the new name is
displayed (for help see
update the reference to the NET, the transceiver prompts you to enter an address each
time you use the entry to make a call.
Renaming a NET is a standard list function. For help see
a list.
Copying a NET
Copying a NET is a standard list function. For help see
list.
Editing a NET
Editing a NET is a standard list function. For help see
list.
Manpack Transceiver 2110 series Reference Manual
If this prompt is
displayed...
Link?
Response?
Tune Time?
LQA Exchange?
Slot Width?
The new NET is created and the List Manager remains open.
If you want to view the NET you have created, press
page 183, Editing an entry in the Address
Do this...
• select how you want member stations to operate
during link establishment
• select whether or not your station responds to a
NET call
Only stations that are members of a NET are
NOTE
able to send a response.
• increase or decrease the tuning time
• select whether or not LQA information is
exchanged during NET calls
• select whether the width of the response slot is
fixed or variable
page 114, Copying an entry in a
page 115, Editing an entry in a
The NET List
to close the List Manager.
List). If you do not
page 114, Renaming an entry in
163