Operating The Data Modem; Uninstalling The Data Modem - Codan 2110 series Reference Manual

AES-256 digital data encryptor option

Operating the data modem

For information on operating the RM50 HF Data Modem with the RC50-C HF Email
Gateway software, see the documentation provided with this software.

Uninstalling the data modem

NOTE
If the RM50 HF Data Modem is no longer being used, and you want to remove it
physically from the system, you may also want to remove it from the memory of the
transceiver. The address of the modem remains in the transceiver and is used during
soundings. If the modem is being permanently removed and you do not want to continue
with soundings to this address, you must refresh the addresses in the site manager
information.
To remove the RM50 from the memory of the transceiver:
1
1
1
1
1
To remove the RM50 from the site manager information:
1
1
1
1
1
330
In the following discussion, you must log in as administrator to see the
entries in the Control List (see
user level).
until Main Menu is displayed.
Press
Scroll to Control, then press
Scroll to Devices, then press
Scroll to Uninstall: RM50, then hold
A pop-up showing Modem info: Removed: RM50 is displayed.
Press until Main Menu is displayed.
Press until Main Menu is displayed.
Scroll to Control, then press
Scroll to ALE LQA Clear, then hold
Scroll to Refresh addresses, then press
until Main Menu is displayed.
Press
page 128, Logging in to admin level from
.
.
.
.
.
.
Manpack Transceiver 2110 series Reference Manual