Codan 9480 Operator's Handbook Manual
  1. Manuals
  2. Brands
  3. Codan Manuals
  4. Transceiver
  5. 9480
  6. Operator's handbook manual

Codan 9480 Operator's Handbook Manual

Hf ssb transceiver
Hide thumbs
Table of Contents

Advertisement

Quick Links

HF SSB transceiver type 9480
Operators handbook

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 9480 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Codan 9480

Summary of Contents for Codan 9480

  • Page 1 HF SSB transceiver type 9480 Operators handbook...
  • Page 3 No part of this handbook may be reproduced, transcribed, translated into any language or transmitted in any form whatsoever without the prior written consent of Codan Pty Ltd. © Copyright 1994 Codan Pty Ltd. Codan Part No. 15-04047 Issue 2, March 1995...

  • Page 5: Table Of Contents

    Switching on or off with a PIN......... 4-3 The transceiver display ............4-4 Option codes ..............4-4 Displaying the channel option.......... 4-5 Dimming the display and indicators ........4-6 Reviewing the EPROM version and options......4-7 Selecting channels..............4-9 9480 HF SSB transceiver...
  • Page 6 Answering a received call............ 5-18 Returning a received call ............. 5-19 Reviewing the list of received calls in memory ....5-20 Reviewing calls held in memory ........5-21 Using the beacon feature............5-23 Selective beacon mode........... 5-25 9480 HF SSB transceiver...
  • Page 7 Inserting the microprocessor PCB link ......8-5 Reviewing setup options ............8-6 PTT timer ................8-7 Enter a PIN (Personal Identification Number)....... 8-9 Changing or deleting a PIN ..........8-11 Power-on settings..............8-13 Mute settings ..............8-13 9480 HF SSB transceiver...
  • Page 8 Microphone socket .............. 10-2 External alarm socket ............10-3 Antenna control socket ............10-4 Antenna control—standard ..........10-5 Antenna control—option AD ......... 10-6 Remote control socket ............10-7 11. Specifications .............11-1 12. Options and accessories ...........12-1 9480 HF SSB transceiver...
  • Page 9 The transceiver front panel ............2-8 The control head front panel .............2-9 The transceiver rear panel ............2-10 The control head rear panel.............2-10 Typical fixed base station installation ........3-1 Typical mobile installation............3-2 The front panel link..............8-2 The microprocessor link............8-4 9480 HF SSB transceiver...
  • Page 10 Contents 9480 HF SSB transceiver...

  • Page 11: About This Handbook

    1. About this handbook Who should use this handbook This handbook is written for the person who installs and operates the Codan 9480 transceiver. Icons and standards The following icons and standards have been used throughout this handbook. This icon…...

  • Page 12: Glossary

    About this handbook Glossary Antenna Driver Liquid Crystal Display Lower Side Band Personal Identification Number Press To Talk Remote Receive Selective call Decode Transmit Upper Side Band Error! Main Document Only.-2 9480 HF SSB transceiver...

  • Page 13: Overview

    2. Overview Your 9480 HF SSB transceiver employs the latest concepts in design and reliability for long range communications. It has been designed for fixed base station and mobile installations (12V DC operation). There are two versions of the transceiver; one with front panel control and the other with extended control.
  • Page 14 This facility scans selected channels for audio signals. You can program a maximum of 15 channels to be scanned in sequence for audio signals. When a selective call decode is selected, a maximum of eight selective channels can be scanned. Error! Main Document Only.-2 9480 HF SSB transceiver...

  • Page 15: The Transceiver And Control Head Front Panels

    Dims the display and indicators when pressed. • Keys in the number 2. • Keys in the number 3. • Is used for PIN setup. Keys in the number 4. Keys in the number 5. 9480 HF SSB transceiver Error! Main Document Only.-3...
  • Page 16 It also shows messages regarding the operation of the transceiver. Emgcy Transmits a digital emergency call. Call USB/LSB Selects USB or LSB mode. The display indicates which side band is selected. Error! Main Document Only.-4 9480 HF SSB transceiver...
  • Page 17 10 Hz to help clarify the received speech. Clarifier Reduces the received audio frequency in steps of 10 Hz to help clarify the received speech. Selects the next higher channel. Channel Selects the next lower channel. 9480 HF SSB transceiver Error! Main Document Only.-5...
  • Page 18 Overview Item No. Item Function Increases the audio volume. Volume Decreases the audio volume. Scan Selects channel scan. Tune Tunes the antenna (if using an automatic tuning whip antenna). Error! Main Document Only.-6 9480 HF SSB transceiver...

  • Page 19: The Transceiver And Control Head Rear Panels

    Antenna socket. Earth (ground) screw. Automatic antenna control socket. 12V DC power lead. External 8 ohm loudspeaker socket. Remote control unit socket. Serial-input socket used for programming channels via an XP. External alarm. 9480 HF SSB transceiver Error! Main Document Only.-7...

  • Page 20: The Transceiver Front Panel

    Overview Figure 2.1: The transceiver front panel Error! Main Document Only.-8 9480 HF SSB transceiver...

  • Page 21: The Control Head Front Panel

    Overview Figure 2.2: The control head front panel 9480 HF SSB transceiver Error! Main Document Only.-9...

  • Page 22: The Transceiver Rear Panel

    Overview Figure 2.3: The transceiver rear panel Mounting cradle Figure 2.4: The control head rear panel Error! Main Document Only.-10 9480 HF SSB transceiver...

  • Page 23: Installation

    DC output from the power supply is connected to the transceiver, which in turn is connected to an antenna. Broadband antenna system Coaxial cable Microphone 9480 transceiver Earth point AC mains AC Power supply Figure 3.1: Typical fixed base station installation 9480 HF SSB transceiver...

  • Page 24: Mobile

    Automatic tuning whip antennas Front control transceiver Microphone 12V Battery 9480 transceiver Coaxial Vehicle mounting control cradle cable Vehicle earth Extended control transceiver 9480 transceiver 12V Battery Control head Speaker Microphone Figure 3.2: Typical mobile installation 9480 HF SSB transceiver...

  • Page 25: Mounting The Transceiver

    There are two types of mounting cradles that can be used when installing your transceiver: • code 117 mounting cradle—front entry (normally supplied with the 9480) • code 118 mounting cradle—top/bottom entry. Both types of cradle (supplied with 6 metres of DC power cable) can be used to mount the transceiver.

  • Page 26: Code 117 Mounting Cradle-Front Entry

    Apply gentle pressure to the front panel of the transceiver and lock into the cradle by turning the cam catches one quarter of a turn in either direction with a suitable tool or small coin. 9480 HF SSB transceiver...

  • Page 27: Code 118 Mounting Cradle-Top/Bottom Entry

    The adaptor plates projecting studs fit into the slides in the cradle. Insert the transceiver adaptor plate studs into the cradle slides and push fully into the cradle. Secure the transceiver into the cradle with the spring clips. 9480 HF SSB transceiver...

  • Page 28: Mounting The Extended Control Head

    Secure the control head to the mounting cradle with the two screws and washers. Mount the transceiver (refer to page 3-3, Mounting the transceiver). 9480 HF SSB transceiver...
  • Page 29 Notes: If necessary, remove the cover from one connector to pass the cable through restricted openings. If the cable is too long, gather the excess neatly at one point. Connect the extension speaker cable to either the control head or the transceiver. 9480 HF SSB transceiver...

  • Page 30: Power Supply

    200 mm. The cables can be brought together for short distances, for example, to pass through the same hole in a bulkhead. Failure to observe this warning will cause distortion of the transmitted audio signals. 9480 HF SSB transceiver...

  • Page 31: Grounding

    Detailed and specific installation instructions are provided with each antenna and antenna tuner. These instructions must be followed to gain the best possible results from your antenna, antenna tuner and transceiver. 9480 HF SSB transceiver...
  • Page 32 Installation 3-10 9480 HF SSB transceiver...

  • Page 33: Using The Transceiver

    Unless otherwise stated, it is assumed throughout this section that: • the 12V DC power is supplied to your transceiver • the front panel On/Off button is switched on. Refer to page 4-2, Switching the transceiver on or off. 9480 HF SSB transceiver Error! Main Document Only.-1...

  • Page 34: Switching The Transceiver On Or Off

    To switch off, The display and The transceiver is turned press indicators go off. off. On/Off Error! Main Document Only.-2 9480 HF SSB transceiver...

  • Page 35: Switching On Or Off With A Pin

    Switching on or off with a PIN It is most important not to forget your PIN, otherwise you will never be able to switch on your transceiver. If this happens, you will have to return your transceiver to Codan for them to delete the allocated number.

  • Page 36: The Transceiver Display

    Error! Main Document Only.-4 9480 HF SSB transceiver...

  • Page 37: Displaying The Channel Option

    There are six spaces in the option bar that contain either a code (see Option codes) or an underscore ( _ ). An underscore indicates that no function has been enabled. 9480 HF SSB transceiver Error! Main Document Only.-5...

  • Page 38: Dimming The Display And Indicators

    Only one dim setting is available. To restore the This restores both the brightness, press display and indicators to their maximum brightness. This function does not work when you are in numeric entry mode. Error! Main Document Only.-6 9480 HF SSB transceiver...

  • Page 39: Reviewing The Eprom Version And Options

    This shows the Program (EPROM) type number (example 90-20541-2). Some indicator lamps turn off. Program (EPROM) issue number. This is an example of EPROM issue 5.60. 9480 HF SSB transceiver Error! Main Document Only.-7...
  • Page 40 E indicates that the transceiver is enabled for entering transmit frequencies from the front panel Release This switches off your On/Off transceiver. Error! Main Document Only.-8 9480 HF SSB transceiver...

  • Page 41: Selecting Channels

    Keep a the display, and the button pressed to move Channel transmit and receive quickly through the frequencies to the right. channels. 9480 HF SSB transceiver Error! Main Document Only.-9...

  • Page 42: Adjusting The Volume

    Press either the up The display does not Pressing this button or down arrow change. either increases or decreases the volume. Volume You hear a ‘pip’ when the volume control has reached its operating limit. Error! Main Document Only.-10 9480 HF SSB transceiver...

  • Page 43: Using The Clarifier

    Clarifier button. You hear a ‘pip’ when Clarifier the clarifier control has reached its operating limit. Note: the clarifier resets to the middle frequency when you change channels, or switch off. 9480 HF SSB transceiver Error! Main Document Only.-11...

  • Page 44: Changing The Operating Mode (Usb-Lsb)

    Your transceiver has the facility to operate in either Upper Side Band (USB) or Lower Side Band (LSB) mode. Step Action… Display shows… Remarks… To switch The display does not The relevant indicator between USB and change. lights up. LSB, press USB/LSB Error! Main Document Only.-12 9480 HF SSB transceiver...

  • Page 45: Using The Mute Control

    The display does not The indicator is lit when press change. this option is selected. Mute Inhibits background Voice noise until a selective S’Call call is received. until the S’Call indicator is lit. 9480 HF SSB transceiver Error! Main Document Only.-13...

  • Page 46: Tuning The Antenna

    Once tuned successfully you hear two high pitched ‘pips’. If tuning is unsuccessful you hear two low pitched If tuning was tones. For further unsuccessful information, refer to the antenna handbook. Error! Main Document Only.-14 9480 HF SSB transceiver...

  • Page 47: Multi-Frequency Tapped Whip Antenna

    • the frequency to match the printed next to the transmit frequency. • a number that corresponds to a frequency on the list supplied with the antenna. 9480 HF SSB transceiver Error! Main Document Only.-15...

  • Page 48: Antenna Tuners

    Manual Step Action… Display shows… Remarks… Select the Refer to page 4-9, required channel. Selecting channels. Hold down The display does not change. Tune while adjusting the antenna tuner. Error! Main Document Only.-16 9480 HF SSB transceiver...
  • Page 49 Using the transceiver Automatic There are two models of Codan automatic antenna tuners, the 4203 and the 9103. The 4203 produces display messages on the transceiver; the 9103 does not. Further information on these antenna tuners can be found in the relevant handbooks.

  • Page 50: Transmitting

    This facility prevents problems occurring if you have jammed the PTT button down. The ‘time out’ period can be adjusted to suit your requirements— refer to Section 8, Changing the setup options. Error! Main Document Only.-18 9480 HF SSB transceiver...

  • Page 51: Transmitting A Message

    ‘inhib’, select another channel on which to transmit. Tune the antenna. Refer to page 4-14, Tuning the antenna. Listen and check that the channel is free from traffic. 9480 HF SSB transceiver Error! Main Document Only.-19...
  • Page 52 Display shows… Remarks… Press the PTT The Tx indicator flashes button on the during transmission. microphone and commence talking. Transmit your message following the notes outlined in Using the microphone on page 4-18. Error! Main Document Only.-20 9480 HF SSB transceiver...

  • Page 53: Setting Up For Emergency Call Transmission

    Enter emergency call can be sent. If the ID you enter ends in a double zero (group call), the call may be responded to by 100 transceivers. 9480 HF SSB transceiver Error! Main Document Only.-21...
  • Page 54 Enter Note: If you do not wish to receive emergency calls, you can switch your 9480 transceiver off at this point. If you want to be able to receive emergency calls, refer to page 4-25, Setting up to receive an emergency call, from step 3 onwards.

  • Page 55: Making An Emergency Call

    After the tune sequence terminates, the emergency call is transmitted to the preset station selcall ID regardless of whether the automatic tune process succeeded. 9480 HF SSB transceiver Error! Main Document Only.-23...

  • Page 56: Manual Override

    Emgcy selected at the time. Call After 30 seconds of user inactivity, the Emergency for two seconds. button reverts to its automatic operation. Error! Main Document Only.-24 9480 HF SSB transceiver...

  • Page 57: Setting Up To Receive An Emergency Call

    Press The display indicates that Enter the transceiver will not respond to incoming digital emergency calls. Press any The transceiver will respond from now on. button Press any Toggled off again. button 9480 HF SSB transceiver Error! Main Document Only.-25...
  • Page 58 Press For example, the the appropriate transceiver will now numeric keys respond to digital followed by emergency calls directed Enter to its own ID as well as 1234. Error! Main Document Only.-26 9480 HF SSB transceiver...
  • Page 59 ID to Call which this transceiver will respond has not been entered yet. Press This takes you back to Emgcy the start of the procedure. Call Press The setup operation is On/Off complete. 9480 HF SSB transceiver Error! Main Document Only.-27...

  • Page 60: Receiving An Emergency Call

    External alarm contacts pulse on and off at a rate of 350 ms for 5 minutes. After the 5 minute period has expired, the transceiver generates the ‘called pips’ (every 4 seconds) as for normal unacknowledged selcalls. Error! Main Document Only.-28 9480 HF SSB transceiver...

  • Page 61: Using Selective Call

    (the self-identification). All displays in this section show examples of channel and frequency numbers. You must insert your selected channel and frequency numbers. 9480 HF SSB transceiver Error! Main Document Only.-1...

  • Page 62: Selective Call Terms

    A signal automatically transmitted back from the receiving transceiver to indicate message received and decoded satisfactorily. This signal does not apply to group calls. Selective beacon A call used to check signal conditions to a selected station. call Error! Main Document Only.-2 9480 HF SSB transceiver...
  • Page 63 Using selective call This term… Means… Self-identification The four digit identification number of the calling transceiver. Station A term used for the location of a transceiver, either mobile or fixed based. 9480 HF SSB transceiver...

  • Page 64: Setting Up Selective Call

    ‘99’ as they are used for the group call and beacon facilities. You must always enter information within 60 seconds of pressing the Enter button, otherwise the transceiver reverts to the normal mode. Error! Main Document Only.-4 9480 HF SSB transceiver...

  • Page 65: Setting The Preamble Time Period

    Press Once enter has been Enter pressed, the preamble time has been set and can only be changed by repeating this procedure. If your transceiver has the preset selective calling switches fitted, proceed to step 6. 9480 HF SSB transceiver...

  • Page 66: Setting The Fixed Called Address

    If your transceiver has the pre-set selective calling switches fitted, proceed to step 8. The next step must be completed within 60 seconds. Error! Main Document Only.-6 9480 HF SSB transceiver...

  • Page 67: Setting The Self-Identification Address

    Press Once Enter has been Enter pressed, the self- identification address has been set and can only be changed by repeating this procedure. The next step must be completed within 60 seconds. 9480 HF SSB transceiver...

  • Page 68: Enabling Or Disabling Selective Call Lockout

    5-23, Using the beacon feature. Press This turns your On/Off transceiver off and registers all the new selective call settings. Error! Main Document Only.-8 9480 HF SSB transceiver...

  • Page 69: Checking If A Channel Is Enabled For Selective Call

    Remarks… Hold down An S in the left position of the options bar Disp indicates that the channel is enabled for selective calling. The display returns to its Release original display in approximately one Disp second. 9480 HF SSB transceiver...

  • Page 70: Selective Call Mute Enable Or Inhibit

    Mute switches between Voice shows enable and inhibit S’Call (inhib). and press On/Off Press Stop at the selection you Mute require. Voice S’Call Press No display. The transceiver is now On/Off switched off. Error! Main Document Only.-10 9480 HF SSB transceiver...
  • Page 71 Display shows… Remarks… Return the front Refer to Section 8, panel link to its Changing the position of original position the front panel link. (E or F). Replace the cover before switching on your transceiver. 9480 HF SSB transceiver 5-11...

  • Page 72: Enabling A Channel For Selective Call

    Press You hear a ‘pip’. Enter Press You hear a ‘pip’. Enter Press You hear a ‘pip’. Enter The display shows the individual options for the chosen channel. Error! Main Document Only.-12 9480 HF SSB transceiver...
  • Page 73 The information will already used, you normal. either be stored under an can either enter existing channel number another number or or you will have created press Enter again a new one. to override the existing one. 9480 HF SSB transceiver 5-13...

  • Page 74: Transmitting A Selective Call

    Tuning the antenna. Tune Press The display does not The indicator turns off Mute change. and you hear background Voice noise. S’Call to turn the Mute button to the off position. Error! Main Document Only.-14 9480 HF SSB transceiver...
  • Page 75 If the channel is busy, wait until the channel is free or try another channel. Press The display does not The Tx indicator is lit Call change. and you hear a ‘warbling’ sound for approximately 10 seconds. 9480 HF SSB transceiver 5-15...
  • Page 76 You hear nothing if this received your call is a group call. successfully, you You can now speak to hear the short the other station. tones of the revertive signal after a few seconds. Error! Main Document Only.-16 9480 HF SSB transceiver...

  • Page 77: Receiving A Selective Call

    • a ‘pip’ is heard every four seconds • the external alarm relay contacts close for approximately two minutes (refer to page 5-29, Using the external alarm feature). 9480 HF SSB transceiver 5-17...

  • Page 78: Answering A Received Call

    S’call mute. succession. next (if any) unanswered The second press of the calls. PTT button allows you to transmit to the caller. Error! Main Document Only.-18 9480 HF SSB transceiver...

  • Page 79: Returning A Received Call

    Call If the call is answered, proceed to use the transceiver in the normal way. The caller details are deleted when you press the PTT button on the microphone. 9480 HF SSB transceiver 5-19...

  • Page 80: Reviewing The List Of Received Calls In Memory

    Switching the transceiver off using the On/Off button deletes all calls stored in the memory stack. The Disp button is used to review the list of received calls held in the memory. Error! Main Document Only.-20 9480 HF SSB transceiver...

  • Page 81: Reviewing Calls Held In Memory

    ‘CALd’. To view the calls The first station to call is held in memory, displayed first. press The display shows the callers identification Disp code (1374) and the channel used (3). twice within one second. 9480 HF SSB transceiver 5-21...
  • Page 82 ‘CALd’ until from step 1 is shown. memory is empty. Press The display shows the This returns the standard display. transceiver to normal Disp operation. Error! Main Document Only.-22 9480 HF SSB transceiver...

  • Page 83: Using The Beacon Feature

    If mobile transceivers have the beacon enabled, the first two digits of each mobile transceiver’s self-identification address should be set to a different number so that they do not all transmit a beacon response together. 9480 HF SSB transceiver 5-23...
  • Page 84 No alarm or call is recorded at the receiving transceiver, only the Tx indicator flashes. If the receiving transceiver is in scan mode, the scan sequence recommences immediately. Normal selective call operation is not affected. Error! Main Document Only.-24 9480 HF SSB transceiver...

  • Page 85: Selective Beacon Mode

    S’call Mute is automatically switched B’con off. Use the numeric This allows you to send a buttons to enter selective call to a station the required whose address number is selective call 1374. address number. 9480 HF SSB transceiver 5-25...
  • Page 86 You can check these tones for signal strength and compare them with signal strengths from other channels. Select the channel giving the best return signal strength. Error! Main Document Only.-26 9480 HF SSB transceiver...

  • Page 87: Beacon Mode

    Use the address begins with 13. first two digits of the stations self identification number and ensure the last two are 99. 9480 HF SSB transceiver 5-27...
  • Page 88 You can check these tones for signal strength and compare them with signal strengths from other channels. Select the channel giving the best return signal strength. Error! Main Document Only.-28 9480 HF SSB transceiver...

  • Page 89: Using The External Alarm Feature

    Plug connections: pins 2 and 3. Further details on the socket can be found in Section 10. These contacts must not be used to switch voltages greater than 50V, or loads that draw more than 1 Amp. 9480 HF SSB transceiver 5-29...
  • Page 90 Using selective call Error! Main Document Only.-30 9480 HF SSB transceiver...

  • Page 91: Using The Receiver In Scan Mode

    The scanning facilities can only be used with a suitable antenna system. Mobile installations require a Codan automatic tuning whip antenna. It is assumed that before you use any of the procedures in this section, you have turned on the transceiver unless otherwise requested.

  • Page 92: Setting Up The Scan Mode

    Each press of the Scan Scan button scrolls to the next option. If this is the option you want, go to step 6. Press Switches to Auto option. Scan If this is the option you want, go to step 6. 9480 HF SSB transceiver...
  • Page 93 You have now selected S’Call selective call mute to be enabled as soon as you enter the automatic scan mode. Press No display. Your selection has been On/Off made and the transceiver is now switched off. 9480 HF SSB transceiver...

  • Page 94: Programming The Channels To Be Scanned

    Selecting channels. Press Channels required to operate on selective call must be enabled. Channel Press The channel is Scan programmed for scanning. Repeat this procedure until all channels you want to scan have been programmed. 9480 HF SSB transceiver...
  • Page 95 Use the channel button to scroll through the channels. Any channel in the scan program is indicated by ‘prog’ on the display (as shown in step 3 above). The scan program can be inhibited, refer to page 6-2, Setting up the scan mode. 9480 HF SSB transceiver...

  • Page 96: Receiving In Scan Mode

    The display shows the The Scan indicator is no Scan last channel scanned. longer lit. or press the microphone PTT button twice. Note: If you only press the PTT button once, the display shows ‘NO PTT Error’ 9480 HF SSB transceiver...

  • Page 97: Changing The Scan Mode

    Receiving in scan mode. Pause scanning You hear a single ‘pip’ and the Voice indicator is Press once lit. Mute Voice If you want Hold S’Call scanning, go to step 3. To exit this mode go to step 5. 9480 HF SSB transceiver...
  • Page 98 4. S’Call To exit this mode go to step 5. Continuous You hear a single ‘pip’ scanning and the Voice indicator is off. Press again Mute Voice S’Call To exit this mode, press Scan 9480 HF SSB transceiver...

  • Page 99: Using Selective Call In Scan Mode

    S’Call transceiver you hear a indicator is lit. series of three telephone rings followed by ‘pips’ every four seconds. If the call is not addressed to your transceiver, the scan continues. 9480 HF SSB transceiver...
  • Page 100 After this period the detected, the transceiver carries on display repeats the scanning. same message with the appropriate channel frequency. To stop scanning, The scan indicator is no press longer lit. Scan 6-10 9480 HF SSB transceiver...

  • Page 101: Programming Channels

    Channels are stored in memory but can be reprogrammed or deleted at any time by the operator. All displays in this section show examples of channel and frequency numbers. You must insert your selected channel and frequency numbers. 9480 HF SSB transceiver...

  • Page 102: Setting Up The Channel Inhibit Options

    PCB. Further details can be found in Section 8, Inserting the microprocessor link. This section covers two procedures: • Checking if the inhibit link has been fitted to the PCB • Changing the inhibit options. 9480 HF SSB transceiver...

  • Page 103: Checking If The Inhibit Link Is Fitted To The Pcb

    Press No display. The transceiver is now On/Off switched off. Replace the cover Refer to Section 8, before switching Changing the position of on your the front panel link. transceiver. 9480 HF SSB transceiver...

  • Page 104: Changing The Inhibit Options

    ‘Std’, shows ‘Full’ or ‘Total inhib’. and press Pressing the Enter button On/Off scrolls through the available options. If this is the option you want, go to step 6. 9480 HF SSB transceiver...
  • Page 105 2 pads on microprocessor PCB. Return the front Refer to Section 8, panel link to its Changing the position of original position. the front panel link. Replace the cover before switching on your transceiver. 9480 HF SSB transceiver...

  • Page 106: Creating Receive Only Channels

    250 kHz and 30 MHz. either a ‘too hi’ or ‘too The display shows an lo’ error message, refer example of 5 MHz. to page 7-12, Programming display messages. Press This facility defaults to Enter the last channel setting. 9480 HF SSB transceiver...
  • Page 107 ‘Full’, ‘Used’ or between 1 and 15. ‘inhib’, refer to page 7-12, Programming display messages. Press This registers the new Enter channel in your transceiver. You can now continue with normal transceiver operations. 9480 HF SSB transceiver...

  • Page 108: Creating Transmit And Receive Channels

    60 seconds. Use the numeric This example is for buttons to enter transmit frequency 3421. the transmit The frequency must be frequency. entered to the nearest 100 Hz, between 250 kHz and 30 MHz. Press Enter 9480 HF SSB transceiver...
  • Page 109 Stop when you reach the option you require. Refer to Section 4, Option codes. Press This registers the options Enter you selected and allows you to enter a channel number. 9480 HF SSB transceiver...
  • Page 110 ‘Full’, ‘Used’ or between 1 and 15. ‘inhib’, refer to page 7-12, Programming display messages. Press This registers the new Enter channel in your transceiver. You can now continue with normal transceiver operations. 7-10 9480 HF SSB transceiver...

  • Page 111: Deleting Unwanted Channels

    Enter Press twice Two zeros entered as a channel number cause the transceiver to erase B’con the information in that channel. Press If the display shows Enter ‘inhib’, refer to page 7-12, Programming display messages. 9480 HF SSB transceiver 7-11...

  • Page 112: Programming Display Messages

    Enter button again. If the overwrite protection link is not installed, pressing the Enter button again will erase the frequency previously allocated to this channel number. 7-12 9480 HF SSB transceiver...

  • Page 113: Full (Full)

    During any channel programming operations, copying or creating a channel, you can press the Enter button instead of entering a channel number. This creates a temporary channel which will not be saved when you switch off the transceiver. 9480 HF SSB transceiver 7-13...
  • Page 114 Programming channels 7-14 9480 HF SSB transceiver...

  • Page 115: Changing The Setup Options

    Some of the setup options in this section can be completed by the user; others must only be carried out by qualified personnel, either at the Codan factory or by a Codan agent. A statement is made in the procedure whenever qualified personnel are required.

  • Page 116: The Front Panel Link

    E used for extended control head transceivers. 21FE Link Link Extended control head Front panel control Figure 8.1: The front panel link Error! Main Document Only.-2 9480 HF SSB transceiver...

  • Page 117: Changing The Position Of The Front Panel Link

    After completing the set-up procedures, turn the transceiver off and disconnect the power before returning the link to its original position. Replace the cover before reconnecting the power to your transceiver. Your transceiver is now ready for normal use. 9480 HF SSB transceiver Error! Main Document Only.-3...

  • Page 118: The Microprocessor Pcb Link

    A link soldered across the number 2 pads prevents you from changing the inhibit setup options on channel programming. 1 2 3 4 Microprocessor link Figure 8.2: The microprocessor link Error! Main Document Only.-4 9480 HF SSB transceiver...

  • Page 119: Inserting The Microprocessor Pcb Link

    After completing the setup procedure, turn the transceiver off and disconnect the power before removing the link. Replace the cover before reconnecting the power to the transceiver. The transceiver is now ready for normal use. 9480 HF SSB transceiver Error! Main Document Only.-5...

  • Page 120: Reviewing Setup Options

    S-CALL ENAbLE diSP CALL LONG diSP Addr CALL diSP Addr SELF diSP bEACON ON Ptt CutOut diSP bEEPS loud To exit the review mode and resume normal operations, press the PTT button. Error! Main Document Only.-6 9480 HF SSB transceiver...

  • Page 121: Ptt Timer

    On/Off Press The PTT ‘time out’ time can be changed from 5 to 35 minutes. Volume Press either the button to increase or decrease the time. Stop at the setting you require. 9480 HF SSB transceiver Error! Main Document Only.-7...
  • Page 122 Return the front Refer to the procedure on panel link to its page 8-3. original position. Replace the cover Refer to the procedure on before switching page 8-3. on your transceiver. Error! Main Document Only.-8 9480 HF SSB transceiver...

  • Page 123: Enter A Pin (Personal Identification Number)

    PIN setup shows mode. and press On/Off Use the numeric The display shows the You can select a number buttons to enter number you enter. between 1 and 999999. your PIN. 9480 HF SSB transceiver Error! Main Document Only.-9...
  • Page 124 Return the front Refer to the procedure on panel link to its page 8-3. original position. Replace the cover Refer to the procedure on before switching page 8-3. on your transceiver. Error! Main Document Only.-10 9480 HF SSB transceiver...

  • Page 125: Changing Or Deleting A Pin

    PIN setup shows mode. and press On/Off Use the numeric Example of existing PIN buttons to enter number 1234. your existing PIN, then press You may now change or Enter delete the PIN. 9480 HF SSB transceiver Error! Main Document Only.-11...
  • Page 126 Return the front Refer to the procedure on panel link to its page 8-3. original position. Replace all covers Refer to the procedure on before switching page 8-3. on your transceiver. Error! Main Document Only.-12 9480 HF SSB transceiver...

  • Page 127: Power-On Settings

    Mute when the Voice Mute Voice indicator is lit. S’Call If you wish to select Voice Mute, proceed to step 4. If you wish to select S’call Mute proceed to step 3. 9480 HF SSB transceiver Error! Main Document Only.-13...
  • Page 128 Mute off press Mute Voice S’Call again Press Reverts to normal display Your selection has been Enter showing channel and made and you can switch frequency numbers. off the transceiver. Error! Main Document Only.-14 9480 HF SSB transceiver...

  • Page 129: Beep Volume

    Press Reverts to normal display Your selection has been Enter showing channel and made and you can switch frequency numbers. off the transceiver. 9480 HF SSB transceiver Error! Main Document Only.-15...
  • Page 130 Changing the setup options Error! Main Document Only.-16 9480 HF SSB transceiver...

  • Page 131: Display Messages

    If a transceiver fault is indicated, the transceiver must be switched off and tried again. If the fault re-occurs the transceiver must be sent to Codan or a Codan agent to have the fault rectified. Messages are displayed for five seconds and then normal operation is resumed.

  • Page 132: Messages And Operator Errors

    If the transceiver is scanning, press the Scan button to stop scanning. If the channel selected is a receive- only channel, select another channel. Error! Main Document Only.-2 9480 HF SSB transceiver...
  • Page 133 All 15 channels are programmed. The nominated channel is already programmed. There are four program inhibit options available. Refer to Section 7, Checking if the inhibit link is fitted to the PCB. 9480 HF SSB transceiver Error! Main Document Only.-3...
  • Page 134 A request for you to enter a selective call address. A selective call has been received. This example shows a call received from station 428 on channel 2. A call has been received on another channel. Error! Main Document Only.-4 9480 HF SSB transceiver...

  • Page 135: System Errors

    The external tuner has not completed a tune operation within five minutes. Turn the transceiver off and then try again. No channels have been programmed into the transceiver. 9480 HF SSB transceiver Error! Main Document Only.-5...

  • Page 136: Reviewing The Eprom Program Content

    E indicates that the transceiver is enabled for entering transmit frequencies from the front panel. Error! Main Document Only.-6 9480 HF SSB transceiver...

  • Page 137: Front And Rear Panel Sockets

    Failure to observe this criteria could result in damage to the transceiver. Details are provided on the following sockets: • microphone socket • external alarm • antenna control socket • remote control socket. 9480 HF SSB transceiver Error! Main Document Only.-1...

  • Page 138: Microphone Socket

    Control head view 4 5 6 7 1 2 3 Pin No. Designation Pin No. Designation PTT ground PTT (active low) Audio output Microphone input Audio ground Microphone ground Error! Main Document Only.-2 9480 HF SSB transceiver...

  • Page 139: External Alarm Socket

    When a selective call is detected, internal relay contacts close across pins 2 & 3. The contacts are rated for 1A at 50V DC. Pin No. Designation Pin No. Designation Not used Relay contact Relay contact Not used 9480 HF SSB transceiver Error! Main Document Only.-3...

  • Page 140: Antenna Control Socket

    Antenna control—option AD Fitting of this option is identified with a WARNING label fitted above the antenna control socket. This option allows an 8558 automatic tuning antenna to be connected to the transceiver. Error! Main Document Only.-4 9480 HF SSB transceiver...

  • Page 141: Antenna Control-Standard

    Tune in/out (active low) Switched fused battery voltage Scan (Active antenna, oc, Switched fused battery active low) voltage N.C. Ground N.C. Ground PTT out (+10V 1kΩ source) (oc) = Open Collector (Active high) 9480 HF SSB transceiver Error! Main Document Only.-5...

  • Page 142: Antenna Control-Option Ad

    Switched fused battery voltage + 12V Scan Switched fused battery voltage Motor phase 1 (oc) Ground Motor phase 2 (oc) Motor phase 3 (oc) Motor phase 4 (oc) (oc) = Open Collector (Active high) Error! Main Document Only.-6 9480 HF SSB transceiver...

  • Page 143: Remote Control Socket

    Receiver audio output * Data line enable (I C Bus, Interrupt (I C Bus, 5V) Clock (I C Bus, 5V) Switched fused battery voltage Transmit lamp * Special: Adjusted to suit attached equipment. 9480 HF SSB transceiver Error! Main Document Only.-7...
  • Page 144 Front and rear panel sockets Error! Main Document Only.-8 9480 HF SSB transceiver...

  • Page 145: Specifications

    250 mm W x 320 mm D x 78 mm H; 3.3 kg (excludes vehicle mounting frame) 9482 control head 190 mm W x 50 mm D x 75 mm H; 0.4 kg (includes mounting bracket) 9480 HF SSB transceiver Error! Main Document Only.-1...
  • Page 146 Specifications Error! Main Document Only.-2 9480 HF SSB transceiver...

  • Page 147: Options And Accessories

    12. Options and accessories The following options and accessories are available for the 9480 transceiver. Code Options Fit antenna driver interface for 8558 automatic tuning whip antenna. Program selective call encode (specify operating channels). Fit morse facility. Code Accessories Vehicle installation hardware kit.
  • Page 148 Options and accessories Error! Main Document Only.-2 9480 HF SSB transceiver...

Table of Contents