Recognised Variable Expansion; Table 29: Recognised Variables And Their Associated Information - Codan 2110 series Reference Manual

Making and receiving calls

Recognised variable expansion

The variables listed in
sent with a call. These variables are recognised by the firmware in the 2110 series
Manpack Transceiver. The firmware expands the variable by inserting the current
information associated with the variable into the message.
NOTE
Table 29:
Keyword
$DATE
$GPS
$GPS+
$TIME
$TZ
$VER
200
Table 29 may be added in a Message call or an AMD message
$GPS and $GPS+ variables require Option GPS Enable to be installed.
Recognised variables and their associated information
Function when used in a message
Inserts the current date in the following format:
<name of day> <month> <day> <year>
Inserts the current valid GPS position in the following format:
<latitude> <longitude>
Latitude and longitude are expressed in degrees, minutes,
NOTE
and fraction of minutes, with a direction of N/S or E/W.
If you enter text before $GPS, this is sent as a header for the
NOTE
GPS information stored in the Calls In Log.
Inserts the current valid GPS position in the following format:
<latitude> <longitude> <altitude> <UTC> (<type of reading>)
Latitude and longitude are expressed in degrees, minutes,
NOTE
and fraction of minutes, with a direction of N/S or E/W.
If you enter text before $GPS+, this is sent as a header for
NOTE
the GPS information stored in the Calls In Log.
Inserts the local time of the transceiver in the following format:
<hh>:<mm>:<ss>
Inserts the time zone offset stored in the transceiver in the following
format:
<time zone offset>
Inserts the current version of the transceiver unit firmware in the
following format:
<version number>
Manpack Transceiver 2110 series Reference Manual